PTCL Packet Loss Test

Preset:
Packets: 150
Packet loss rate0.0%0 received / 0 sent
Late packets0Had to be resent
Median ping— msRound-trip time
Jitter— msPing variation
Worst spike— msHighest ping
0SENT
0%TOTAL LOSS
0LOST
↑ 0.0%YOU
Sends real UDP packets from your browser
CloudflareSERVER
Live packet grid0 / 150 packets
Received (0)Late (0)Dropped (0)In flight (0)
Each tile is one real UDP packet. Hover a tile to see its ping.10 packets/sec
Ping of every packet
On timeLateDropped

ReadyReady to test your connection

Pick a preset and press Start. Close downloads and video on other devices first. Test once on WiFi and once on a LAN cable to see where the loss comes from.

Lag in PUBG or calls breaking up? Run a 30-second test on WiFi, then plug in a LAN cable and test again. If the loss disappears on cable, the problem is your WiFi, not PTCL. Ping test · Fiber signal strength

Packet loss test

Sends real UDP packets from your browser, 5 per second, and counts how many come back. Pick a duration and press Start.

Packet loss--0 lost / 0 sent
Ping--median
Jitter--variation
Worst spike--highest ping
Press Start to testFor the most accurate result, close downloads and video on other devices. Test once on WiFi and once on a LAN cable to see where loss comes from.

How to use the packet loss test

  1. Pick a test server. Both Cloudflare and Google answer from the data centre nearest to you, usually Karachi or the Middle East.
  2. Pick a duration. 30 seconds is enough for a quick check; use 2 minutes when you are chasing occasional lag spikes.
  3. Press Start test and keep the tab open. Green bars are packets that came back, orange bars came back late, and red bars were lost.
  4. Read the four numbers: packet loss %, ping, jitter and the worst spike. Use Copy result to paste the numbers into a complaint to your ISP or a message to support.

What is packet loss?

Everything you send or receive online is split into small packets. Packet loss is the share of those packets that never arrive. Web pages and downloads use TCP, which quietly re-sends lost packets, so loss there shows up as slowness. Real-time apps such as online games (PUBG Mobile, Valorant, Free Fire, Call of Duty), WhatsApp and Zoom calls and live streams use UDP, which does not re-send. In those apps a lost packet is simply gone: your character teleports, the voice turns robotic or the video freezes.

How this test measures packet loss

Most "packet loss tests" on the web only time normal web requests, which cannot see loss because TCP hides it. This test uses WebRTC, the technology behind browser video calls, to send STUN binding requests over UDP to Cloudflare or Google. Each request is a single small UDP packet, and the server sends one packet back. If the answer does not arrive, or only arrives after the browser has had to re-send the request, the test counts it as lost. This is the same kind of traffic a game or call uses, so the result matches what you actually feel.

What is a good packet loss result?

Packet lossRatingEffect
0%ExcellentNormal on a healthy wired connection
Up to 1%GoodRarely noticed
1% – 2.5%FairOccasional stutter in games and calls
Above 2.5%PoorRubber-banding, robotic voice, frozen video

Jitter is how much the ping changes from one packet to the next. Under 15 ms is good; above 30 ms games feel inconsistent even with no loss. For a longer live view with world servers, use our gaming ping meter.

Common causes of packet loss in Pakistan

  • Weak or crowded WiFi. The number one cause at home. Walls, distance, neighbours' routers on the same channel and microwave ovens all cause loss on 2.4 GHz.
  • Overloaded router or upload. A big upload (Google Photos backup, CCTV cloud, a torrent) fills the line and the router drops packets. This is called bufferbloat.
  • Line faults. A weak fiber signal or a noisy DSL line causes errors that appear as loss. Check with the signal strength checker and the router lights troubleshooter.
  • ISP congestion at peak hours, typically 8 pm to midnight, or during international cable faults.
  • Mobile data: on Jazz, Zong, Telenor or Ufone 4G, loss rises with weak signal, moving vehicles and crowded cell towers.
  • Old hardware: a damaged LAN cable, a failing network adapter or an old router.

How to fix packet loss

  1. Test on a LAN cable. If loss disappears, the problem is WiFi: move closer, switch between 2.4 and 5 GHz, change the WiFi channel at 192.168.10.1, or add a mesh point.
  2. Pause uploads and downloads on every device, then test again.
  3. Restart the router: power off for 30 seconds. This clears overloaded memory and gets a fresh connection.
  4. Replace the LAN cable and try another port.
  5. Check your line: fiber Rx power above -25 dBm, or DSL SNR margin above 6 dB.
  6. Test at different times. Loss only at night points to congestion on the ISP side.
  7. Report it. If loss stays above 1% on a cable, complain to your ISP (PTCL 1218) with the copied result and the times you tested. Repeated unresolved complaints can be escalated to the PTA.

How to check packet loss in CMD

On Windows you can also run a manual test: press Windows + R, type cmd, then run ping -n 100 8.8.8.8. The summary at the end shows "Lost = X (Y% loss)". Note that some servers deprioritise ICMP ping, so a small loss in CMD does not always mean a real problem; the UDP test above is closer to game and call traffic.

Frequently asked questions

What is a good packet loss percentage?

0% is normal on a healthy wired connection. Up to 1% is usually unnoticeable. 1 to 2.5% causes noticeable stutter in games and calls, and above 2.5% online games rubber-band and video calls freeze.

How does this packet loss test work?

Your browser sends small UDP packets (STUN requests, the same protocol WhatsApp and Google Meet use to set up calls) to a server several times a second and records which ones get an answer. UDP is not resent automatically, so a lost packet shows up as loss, just as it would in a game.

What causes packet loss on PTCL or StormFiber?

The most common causes are weak WiFi, a damaged LAN cable, an overloaded router, line faults (low fiber signal or noisy DSL), and congestion on the ISP's network at peak hours. Test on a LAN cable first to separate WiFi problems from line problems.

Can packet loss be fixed?

Usually. Move closer to the router or use a cable, restart the router, replace old cables, and check the fiber or DSL signal. If loss stays above 1% on a cable at different times of day, report it to your ISP with the test result.

Packet loss kya hota hai?

Packet loss ka matlab hai internet par bheje gaye data ke kuch hisse raaste mein gum ho jate hain. Is se game mein lag, call mein awaz katna aur video atakna hota hai. 1% se zyada loss ho to WiFi ke bajaye cable lagaein aur router restart karein.

More free tools