How to Change PTCL WiFi Password (Every Router Model, 2026)

Updated 22 October 2026 · PTCL Speed Check guide

Changing your PTCL WiFi password is the quickest way to kick out neighbours using your internet and speed things back up. It takes about two minutes on a phone or laptop.

Quick answer: Connect to your PTCL WiFi → open 192.168.10.1 in Chrome → log in (admin / password on the router sticker) → WLAN / Wireless → Security → type a new WPA2 key of 8+ characters → Apply. Reconnect your devices with the new password.

Step by step (works on most PTCL routers)

  1. Connect your phone or laptop to the PTCL WiFi (or a LAN cable). Turn mobile data off on phones.
  2. Type 192.168.10.1 in the browser’s address bar (not the Google search box). Note it is the digit one-zero, not “l0”.
  3. Log in. The default username is usually admin; the password is on the router’s sticker. See the 192.168.10.1 login guide for defaults.
  4. Open the wireless settings using the menu path for your model (table below).
  5. Set security to WPA2-PSK (or WPA2/WPA3), type the new password in the Pre-Shared Key / Passphrase box and press Apply/Save.
  6. Your device disconnects. Reconnect with the new password.

Menu path by router model

Router (PTCL service)Where the WiFi password is
Huawei ONT (Flash Fiber, e.g. HG8245 series, EG8145)Advanced → WLAN → 2.4G Basic Network Settings / 5G Basic Network Settings → WPA PreSharedKey
ZTE ONT (Flash Fiber, e.g. F660, F670L)Network → WLAN → Security (or Local Network → WLAN → WLAN SSID Configuration on newer firmware) → WPA Passphrase
Fiberhome ONT (Flash Fiber)Network → WLAN Settings → Advanced / Security → WPA PreSharedKey
TP-Link (VDSL/DSL)Wireless → Wireless Security → WPA/WPA2-Personal → Wireless Password
Tenda (VDSL/DSL)Wireless Settings → WiFi Name & Password
ZTE / Huawei DSL modemsNetwork → WLAN → Security → WPA Passphrase

Menu names shift slightly between firmware versions. If you can’t find it, look for any menu called WLAN, Wireless or WiFi. The password field is always under Security.

Dual-band routers: change both networks

Flash Fiber routers often broadcast two networks, for example PTCL-BB and PTCL-BB-5G. Change the password on both, or anyone using the other band stays connected. Use 5 GHz for Shoq TV and phones near the router; it is faster but shorter range.

Pick a strong password

  • At least 12 characters, mixing words and numbers (e.g. Chai4Lahore!Rain)
  • Never your phone number, CNIC, name or 12345678
  • Avoid WEP or “Open” security: anyone can join

After changing the password

Also change the router’s admin login password (Management / System Tools) so nobody can log in and change it back. Want to go further? Hide your WiFi and block users. If your internet is still slow, run a PTCL speed test on cable to see if the problem is the line, not WiFi.

Frequently asked questions

How do I change my PTCL WiFi password on mobile?

Connect to the WiFi, turn off mobile data, open 192.168.10.1 in Chrome, log in, open WLAN or Wireless Security, enter a new WPA2 key and tap Apply.

What is the default PTCL router password?

Usually username admin with the password printed on the router sticker. On many units this is the last five digits of the MAC address.

Can PTCL change my WiFi password for me?

Yes. Call 1218 and the agent can usually change it remotely after verifying the account holder.

I forgot the router admin password. What now?

Do a factory reset with the pinhole button, then log in with the default credentials and set up the internet again.