PTCL Router Factory Reset: How to Reset Safely (Flash Fiber & DSL)
Updated 22 October 2026 · PTCL Speed Check guide
A factory reset fixes a forgotten admin password or broken settings, but it also wipes your internet configuration. Read this before pressing the button.
Restart vs reset: try a restart first
| Restart (reboot) | Factory reset | |
|---|---|---|
| How | Power off 30 seconds, then on | Hold RESET pinhole 10–15 seconds |
| Fixes | Slow speed, drops, frozen router | Forgotten admin password, wrong settings |
| You lose | Nothing | WiFi name/password, internet settings, port forwards |
What a reset erases
- DSL / VDSL modems: your PPPoE username and password. Without them the internet won’t connect. They are on your connection documents or available from 1218.
- Flash Fiber ONTs: WAN/VLAN profile and WiFi settings. Many PTCL ONTs are managed remotely and reload their profile automatically; if not, PTCL must push it again.
- Your WiFi name and password return to the ones on the sticker.
- Any port forwarding, DNS changes or MAC filters.
Step by step
- Write down your PPPoE details (DSL) if you can still log in: they are under Network → WAN / Internet.
- Keep the router switched on. Find the RESET hole on the back.
- Press with a pin for 10–15 seconds until all lights blink, then release.
- Wait 2–3 minutes for a full restart.
- Connect using the WiFi name and key printed on the sticker.
- Log in at 192.168.10.1 (admin + sticker password) and set a new WiFi password.
- DSL only: enter the PPPoE username/password in the WAN settings and save.
No internet after reset?
Check the lights. On Flash Fiber, PON should be steady and LOS off; a red LOS means a fiber problem, not the reset. See PTCL router lights. If lights are normal but there’s no internet, call 1218 or register a complaint and say “router reset, needs re-provisioning”.
Frequently asked questions
How do I reset my PTCL router?
Keep it powered on and hold the RESET pinhole for 10 to 15 seconds until the lights flash, then wait 2 to 3 minutes before logging in with the default details.
Will resetting my PTCL router delete my internet settings?
Yes. DSL modems lose the PPPoE login and Flash Fiber ONTs may need PTCL to push the profile again.
What is the PTCL router password after reset?
The WiFi key and admin password printed on the router sticker. The admin username is usually admin.