Hide PTCL WiFi & Block Users: Stop WiFi Thieves (2026)

Updated 22 October 2026 · PTCL Speed Check guide

If your PTCL internet slows down at night or you see devices you don’t recognise, someone may be using your WiFi. Here is how to see who is connected, block them and hide your network.

Quick answer: Log in at 192.168.10.1 → check connected devices / DHCP clients → add unknown MAC addresses to the MAC filter (blacklist) → untick Broadcast SSID to hide the network → change the WiFi password.

Step 1: See who is connected

Log in to the router at 192.168.10.1 and open Status → WLAN / User Device Information (Huawei), Status → Network Interface → WLAN or Local Network → LAN → DHCP (ZTE), or DHCP Clients List (TP-Link, Tenda). Each device appears with a name and a MAC address like A4:5E:60:xx:xx:xx. Match them against your own phones, TVs and laptops (Settings → About → WiFi MAC).

Step 2: Block unknown devices (MAC filter)

  1. Copy the MAC address of the device you want to block.
  2. Open Security → WLAN MAC Filter (Huawei), Network → WLAN → Access Control List (ZTE), Wireless → MAC Filtering (TP-Link) or Wireless → Access Control (Tenda).
  3. Enable the filter in Blacklist / Deny mode and add the MAC address.
  4. Apply. The device drops off immediately.

A determined person can change their device’s MAC address, so MAC blocking alone is not enough. Always change the WiFi password as well.

Step 3: Hide your WiFi network

In the same wireless settings page, untick Broadcast SSID / Hide SSID and apply. Your network disappears from nearby phones’ lists. To connect your own new devices, choose “Add network” and type the name and password manually.

Better long-term protection

  • Use WPA2 or WPA3 with a 12+ character password and change it every few months.
  • Turn WPS off. The push-button/PIN feature is a common way in.
  • Change the router’s admin password from the default.
  • Use the guest network (if available) for visitors.

Still slow after blocking users?

Run a PTCL speed test over a LAN cable. If the cable result is also slow, the problem is the line or the package, not WiFi users. Try the PTCL slow internet fixes, or check for packet loss.

Frequently asked questions

How can I see who is using my PTCL WiFi?

Log in at 192.168.10.1 and open the WLAN or DHCP client list under Status. It shows every connected device with its MAC address.

Does hiding the SSID stop people using my WiFi?

It stops casual users from seeing it, but not people who already know the name and password. Combine it with a new password and a MAC filter.

Will blocking a device affect my internet speed?

Removing unknown devices frees bandwidth, which can noticeably improve speed at busy times.