192.168.10.1 PTCL Router Login

Connect to your PTCL WiFi or plug in a LAN cable, then open the router page:

Open 192.168.10.1 Older DSL modem: 192.168.1.1
SettingPTCL default
Router login IP192.168.10.1 (older DSL modems: 192.168.1.1)
Usernameadmin
Passwordadmin, or the password on the router sticker (on many units the last five digits of the MAC address, no dashes)
WiFi passwordThe WPA key on the router sticker, until you change it

These buttons only work while you are on your home network. Defaults vary by router model and firmware; the sticker is the most reliable source.

How to log in to 192.168.10.1

  1. Connect your phone or laptop to the PTCL router by WiFi or LAN cable. Turn off mobile data.
  2. Type http://192.168.10.1 in the address bar, not the Google search box.
  3. Enter username admin and the password from the table above.
  4. Change the admin password under Management or System Tools so others cannot log in with the default.

Change your PTCL WiFi password

  1. Log in at 192.168.10.1.
  2. Open Network → WLAN or Wireless → Security.
  3. Type a new password (at least 8 characters) in WPA Pre-Shared Key and press Apply.
  4. If you have separate 2.4 GHz and 5 GHz networks, change both.

Factory reset a PTCL router

  1. Keep the router on and hold the RESET pinhole for 10 to 15 seconds until the lights blink.
  2. Wait 2 to 3 minutes, then log in with the default username and password.

A reset also erases your internet settings (PPPoE username on DSL, WAN profile on Flash Fiber). If the internet does not come back, call PTCL on 1218. For slow speed, try switching the router off for 30 seconds first.

192.168.10.1 not opening?

  • Check you are on the PTCL router, not mobile data or a neighbour's WiFi.
  • Try 192.168.1.1 (older DSL modems).
  • Find the right address: on Windows run ipconfig and read Default Gateway; on a phone open the WiFi details and read Router or Gateway.
  • If the admin password was changed and nobody knows it, a factory reset is the only way back in.

After changing settings, run the PTCL speed test to check your connection.

Default IP addresses of common routers in Pakistan

Router / ISPLogin address
PTCL Flash Fiber (Huawei, ZTE, Fiberhome)192.168.10.1
Older PTCL DSL modems192.168.1.1
TP-Link routers192.168.0.1 or tplinkwifi.net
Tenda routers192.168.0.1
Most Huawei and ZTE 4G devices192.168.8.1 or 192.168.0.1

The address on the sticker under your router is always correct for that device. On Windows run ipconfig and look for "Default Gateway"; on Android open WiFi → your network → Router/Gateway.

Keep your PTCL WiFi secure

  • Change the router admin password from the default, not only the WiFi password.
  • Use WPA2-PSK or WPA2/WPA3 security with a password of 12 or more characters.
  • Turn off WPS; its PIN can be guessed by WiFi-cracking apps.
  • Check the connected devices list now and then and block anything you do not recognise.

Router problems? More tools

Frequently asked questions

What is the PTCL router login password for 192.168.10.1?

The default username is admin. The password is usually admin or the password printed on the sticker under the router, which on many PTCL units is the last five digits of the MAC address without dashes. Some PTCL firmware uses a different password; the sticker is the most reliable source.

How do I change my PTCL WiFi password on mobile?

Connect the phone to your PTCL WiFi (not mobile data), open Chrome and go to 192.168.10.1. Log in, open Network > WLAN or Wireless > Security, enter a new WPA password of at least 8 characters and tap Apply. Change both the 2.4 GHz and 5 GHz networks if you have two.

How do I block someone from my PTCL WiFi?

The simplest way is to change your WiFi password, which disconnects everyone. On many PTCL routers you can also block a device under WLAN > MAC Filter or Security > MAC Filtering by adding its MAC address from the connected devices list.

Why is 192.168.10.1 not opening?

Make sure you are connected to the PTCL router and not mobile data. Type http://192.168.10.1 in the address bar, not the search box. Older PTCL DSL modems use 192.168.1.1. Your router address is shown as Default Gateway in ipconfig on Windows or as Router in your phone's WiFi details.

PTCL WiFi ka password mobile se kaise change karein?

Mobile ko apne PTCL WiFi se connect karein, Chrome mein 192.168.10.1 kholein, username admin aur router ke sticker wala password daalein. Phir WLAN ya Wireless Security mein naya password likh kar Apply dabaein.

More free tools

192.168.l0.1 or 192.168.10.1? (the “L” typo)

A lot of people type 192.168.l0.1, with a lowercase L, because the 1 and l look alike on phone keyboards. That address does not exist, so the browser runs a Google search instead of opening your router. Always type the digits 1-9-2 . 1-6-8 . 1-0 . 1. If it still won’t load, see 192.168.10.1 not opening.

PTCL router models and their login pages

Model (PTCL service)Usual loginUsernamePassword
Huawei ONT (Flash Fiber)192.168.10.1 or 192.168.100.1admin (or the user on the sticker)Sticker
ZTE F660 / F670L (Flash Fiber)192.168.10.1 or 192.168.1.1adminSticker
Fiberhome ONT (Flash Fiber)192.168.10.1 or 192.168.1.1adminSticker
TP-Link VDSL/DSL192.168.10.1, 192.168.1.1 or tplinkmodem.netadminadmin or sticker
Tenda VDSL/DSL192.168.10.1 or 192.168.0.1adminadmin or sticker

PTCL customises the firmware, so the sticker on the bottom of your router is always the final word. The exact IP is the “Default Gateway” in your phone’s WiFi details.

PTCL router default username and password

These are the default logins most PTCL routers ship with. If one is rejected, PTCL has set a custom password on your unit: use the one printed on the sticker on the back or bottom of the router.

RouterLogin pageDefault usernameDefault password
PTCL DSL / VDSL modem (TP-Link, Tenda and similar)192.168.10.1adminadmin (some units: ptcl, or the one on the sticker)
Huawei ONT, Flash Fiber (user account)192.168.10.1 or 192.168.100.1admin, or the user on the stickerOn the sticker
Huawei ONT, Flash Fiber (full-access account)192.168.100.1 or 192.168.10.1telecomadminadmintelecom (PTCL changes this on many units)
ZTE / Fiberhome ONT, Flash Fiber192.168.10.1 or 192.168.1.1adminOn the sticker

Default PTCL WiFi name and password

Your router’s default WiFi name (SSID) and WiFi password (WPA key) are printed on the same sticker, usually labelled SSID and WLAN Key or Wireless Password. This is a different password from the router login above. To set your own, follow how to change your PTCL WiFi password.

Router login vs PTCL broadband username

PTCL also gives you a broadband (PPPoE) username and password, usually your landline number with a suffix. That one connects the router to PTCL’s network and is not the router admin login. You only need it after a factory reset; if you have lost it, call PTCL helpline 1218.

Change the default password

Anyone on your WiFi can try admin/admin, so change the router login password after you sign in (usually under System Tools, Management or Maintenance > Account). Forgot the new one? A factory reset brings back the defaults above but also clears your WiFi and internet settings.

Step-by-step router guides

Each common task has its own detailed guide: change WiFi password, hide WiFi and block users, factory reset, port forwarding and change DNS. Router lights flashing red? Read PTCL router lights meaning.

Roman Urdu mein madad اردو میں مدد

PTCL internet ke aam masail ke jawab, aasaan alfaaz mein.

PTCL WiFi ka password mobile se kaise change karein?

Mobile ko apne PTCL WiFi se connect karein, browser mein 192.168.10.1 kholein (kuch routers par 192.168.1.1), admin password se login karein, phir WLAN / Wireless settings mein naya password likh kar Save karein. Hamari router guide mein har model ke steps maujood hain. Details ›

PTCL router ki light red hai, iska kya matlab hai?

Fiber router par red ya blink karti LOS light ka matlab hai ke fiber signal nahi aa raha: taar toot gayi hai, connector nikal gaya hai ya bahar line kat gayi hai. Router restart karne se yeh theek nahi hota. Fiber cable check karein ke mudi hui to nahi, phir 1218 par fault complaint karein. DSL router par red Internet light ka matlab aksar line ya login ka masla hota hai. Details ›

Kuch websites nahi khul rahin, baqi chal rahi hain

Yeh aksar DNS ka masla hota hai. Router ya phone mein DNS ko 1.1.1.1 (Cloudflare) ya 8.8.8.8 (Google) par set karein. Hamare DNS speed test se dekhein ke aap ke liye kaun sa DNS sab se tez hai. Details ›

PTCL net slow chal raha hai, kya karein?

Pehle upar speed test chalayein aur apna package select karein. Agar speed 60% se kam hai to: router 30 second ke liye band karke dobara on karein, phone ya laptop ko 5 GHz WiFi ya LAN cable se connect karein, aur doosre devices par downloads band kar dein. Phir bhi slow ho to 1218 par complaint karein aur complaint number zaroor lein. Details ›